ตรวจข้อสอบ > ธนกฤต แก้วน้อย > ความถนัดเคมีเชิงวิศวกรรมศาสตร์ | Engineering Chemistry Aptitude > Part 1 > ตรวจ

ใช้เวลาสอบ 0 นาที

Back

# คำถาม คำตอบ ถูก / ผิด สาเหตุ/ขยายความ ทฤษฎีหลักคิด/อ้างอิงในการตอบ คะแนนเต็ม ให้คะแนน
1


What is the primary role of transition metal ion catalysts in the catalytic ozonation process for nanoplastic removal?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

2


According to the article, what was the observed effect of using Co2+ at 1 mM on the mineralization rate of polystyrene nanoplastics during ozonation?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

3


In the context of nanoplastics removal, what does the scavenger experiment with methanol demonstrate about the catalytic ozonation process?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

4


If the initial concentration of nanoplastics is 20 mg/L and the catalytic ozonation achieves a 70% mineralization rate, what is the concentration of remaining nanoplastics?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

5


Given an ozone flow rate of 0.5 NL/min and an ozonation time of 120 minutes, how much ozone (in grams) has been used if the ozone concentration is 10 mg/NL?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

6


If reducing the turbidity of water by catalytic ozonation with Co2+ from 100 NTU to 35 NTU represents a 65% reduction, what was the original turbidity?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

7


What is a major benefit of catalytic ozonation over single ozonation in water treatment?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

8


Which of the following is NOT a transition metal ion used as a catalyst in the study?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

9


What environmental issue does the removal of nanoplastics address?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

10


What analytical technique is NOT mentioned as used for monitoring the degradation of nanoplastics?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

11


What effect does the melt fiber spinning system have on the crystallinity of PET fibers?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

12


What role does the spooling speed play in the fiber spinning system described in the article?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

13


According to the article, what was the impact of using the LCC-ICCG enzyme on PET depolymerization?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

14


If the initial mass of PET before enzymatic treatment in a bioreactor was 500 grams and 96.9% mass was lost due to depolymerization, what is the final mass of PET?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

15


Considering the average crystallinity of PET fibers after treatment is 9.7%, what would be the crystallinity if the process conditions were unaltered but the drop distance doubled?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

16


If the surface area to volume ratio of PET increased 15-fold due to processing, and the initial ratio was 0.1 mm²/mm³, what is the new ratio?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

17


What is a major advantage of the melt fiber spinning system over traditional recycling methods?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

18


What does the term 'amorphous content' refer to in the context of PET recycling?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

19


What is the primary benefit of reducing the crystallinity of PET in recycling processes?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

20


Which measurement technique was used to assess the polymer spectra to confirm the presence of PET?

7

-.50 -.25 +.25 เต็ม 0 -35% +30% +35%

ผลคะแนน 0 เต็ม 140

แท๊ก หลักคิด
แท๊ก อธิบาย
แท๊ก ภาษา