| 1 |
What is the primary objective of the robotic system discussed in the article?
|
To perform high-precision assembly tasks. |
|
As robot can do way more precise work that humans |
Knowledge about robot |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 2 |
What does the article say is a significant challenge in robotic assembly?
|
The cost of robot parts. |
|
As the robot are new(kinda) to the market the part are expensive |
This is from my own idea as the “article” is still no where to be found |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 3 |
According to the article, what role do human fingertips play in the robotic system?
|
They provide a model for designing tactile sensors on robots. |
|
As humans fingertip can be a great model for designing robot’s sensor cause they are small and some sensor on the market already use this design |
As still the “article “ is no where to be found |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 4 |
What method is used to avoid failures in the assembly process?
|
Measuring tactile force information. |
|
As measuring tactile force can give you a nice info of what the machine/robot are doing so failures can be avoid by feeding that info in to a feedback system to correct the machine/robot movements |
Engineering/robotic knowledge |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 5 |
What is the result of successfully integrating the discussed technologies into robotics?
|
Increased robotic mobility. |
|
I just want to ask a question.When are we discussing about robot technology? |
The article is not found |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 6 |
Which device is used to measure motion in the robotic system?
|
Accelerometer |
|
Am accelerometer is a device use to detecting a motion of anything that it attach to by calculating the acceleration of a conductive plate that is on each axis |
Engineering Robotic electrical knowledge |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 7 |
How is the force measurement device structured?
|
Using a simple lever and pulley system. |
|
In this case I’m talking about the dynamometers which is a force measurement device. |
How a dynamometers work explain here : https://www.setra.com/blog/test-and-measurement-dynamometer |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 8 |
What is the ultimate goal of the research discussed in the article?
|
To ensure robots never fail at assembly tasks. |
|
Again there is no article to be found |
There is no article to be found |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 9 |
What specific problem does the force measurement address?
|
Detecting subtle forces that indicate potential assembly failures. |
|
Force measurement detect a force that can cause a failure in the assembly system and put it to a stop |
Robotic ,System design,Sensor knowledge |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 10 |
What innovation does the motion measurement device bring to robotic assembly?
|
It measures the exact angles and positions of parts during assembly. |
|
As state a motion measurement device can measure the angle and position of part in the assembly line |
Engineering,System design knowledge |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 11 |
What does ML stand for in the context of the article?
|
Machine Learning |
|
As again I can’t find the article but by my knowledge of CS(Computer science)I know what is ML stand for(Machine learning) |
My knowledge of CS |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 12 |
What is QSAR as mentioned in the article?
|
Quantitative Structure-Activity Relationship |
|
That what QSAR stand for |
Common knowledge |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 13 |
What is the main benefit of machine learning in drug discovery according to the article?
|
Speeding up the decision-making process |
|
ML can be use to help make decision for well-specified questions |
Article about ML in drug research: https://www.nature.com/articles/s41573-019-0024-5 |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 14 |
According to the article, which of these is a focus in academia that differs from industry?
|
Mass production of drugs |
|
As industry can mass produce a drug that an academia can’t |
Again the article is no where to be found |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 15 |
Which organization is mentioned as being involved in fundamental ML and AI research in the article?
|
Centers for Disease Control and Prevention (CDC) |
|
I could not give an accurate answer because the article is no where close o be found |
There is no article |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 16 |
What does DMTA stand for as used in the article?
|
Drug Manufacturing and Testing Agency |
|
As we are talking about drug so we can’t go far from drug topic |
Again they are no article to be found |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 17 |
Which aspect of machine learning models is highlighted as particularly important in the pharmaceutical industry?
|
Ability to handle large data sets |
|
As pharmaceutical industry need to process a large set of data ML can quickly(if the machine that it run from can do a lot of calculations per second) processing a large dataset |
My CS knowledge |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 18 |
What type of data does the article mention as increasingly available to the public?
|
Machine learning training sets |
|
Where is the article?.?.??…… |
The article is no where to be found |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 19 |
Which data set is mentioned as a benchmark for molecular machine learning?
|
GeneBank |
|
There is no article to be found provided so the answer is not accurate |
No article found |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|
| 20 |
What challenge is associated with data sets from different sources, as discussed in the article?
|
Easier regulatory compliance |
|
There’s still no article provided |
If you want to send me the article please send it to Gmail:Jirawatoak74@gmail.com thank you. :D |
7 |
-.50
-.25
+.25
เต็ม
0
-35%
+30%
+35%
|